How the Scale Prep System works:
Scale Prep’s SP3 Anti-Scale Media was especially developed and manufactured to protect against the formation of scale and remove already existing scale from pipes and heat exchange surfaces.
The Scale Prep’s SP3 catalytic media prevents the formation of scale and elimi-nates existing scale by accelerating the transformation of the calcium and mag-nesium minerals into harmless “Nano” particles. As the nano particles flow through plumbing systems, they do not attach to pipes, fixtures, valves, or heat-ing elements; the result is 99% scale prevention and removal!
Scale Prep’s SP3 is successfully used in a number of applications for both residential and commercial usage. Virtually maintenance free, chemical free, and salt free, Scale Prep’s SP3 media water conditioners are a cost effective alterna-tive where benefits and overall performance surpasses our competitors.
• Commercial and residential applications
• Preserves beneficial minerals
• Does not release harmful minerals or chemicals into our water system
• Maintenance free
• No electricity
• Chemical free
• Eliminates existing scale
• Reduces soap and chemical consumption by 30-40%
• Salt free
• Reduces energy consumption
How does calcium get into the water?
Much of our drinking water comes from ground water, originating as precipitation and falling to Earth in the form of rain or snow. This water seeps into the ground, filling the open spaces beneath the surface. As the rain or snow passes through the atmosphere it is enriched with carbon dioxide (CO2) while combining with H2O to form a solvent of Calcium known as Carbonic Acid (H2CO3). As this moisture seeps into the ground, the Carbonic Acid extracts calcium from the earths calcium-rich stone, forming Hydrogen Carbonate (Ca(HCO3)2). As this extraction process ends, the water is saturated with calcium and carbonic acid,forming a carbonic acid/calcium equilibrium. The amount of calcium in our water can be high or low, depending on how much calcium is drawn into the water.
Calcium scale is a hard, thick coating of calcium carbonate (CaCO3) that forms on heating elements, in pipes, plumbing fixtures, water using appliances and RO systems. As calcium-rich water enters the home, the carbonic acid/calcium equilibrium is interupted within the pipes, plumbing fixtures, water heaters, appliances or water using devices. Because the Hydrogen Carbonate (Ca(HCO3)2) is a weak chemical compound, increases in temperature or water movement will cause the compound to breakdown, causing parts of the Calcium (Ca2), Magnesium (Mg2) and Bicarbonate (HCO3) to attach to the surfaces of heating elements, the inside of pipes, water heaters, plumbing fixtures and water using devices. Over time the scale coating continually thickens and is very difficult and costly to remove.
The negative effect of calcium is the scale it creates in or on pipe surfaces, water heaters, plumbing fixtures, heating elements, R/O systems and water using devices. The scale leads to higher energy, operating and maintenence costs for ice machines, coffee machines, reverse osmosis equipment, water heaters and other water using equipment. The scale may also breed bacteria.
Scale Prep System must be the last form of water treatment equipment installed with the exception of an RO unit or POU filter.
Recommended to use a carbon pre-filter for municipal applications (carbon pre-filters reduces the negative effects of high chlorine on the media and lowest levels of iron .4 ppm. ***Note: You must change out your carbon filter to keep proper flow rates).
Recommended that you soak the media for 60-120 minutes before start up. This assures that the media is saturated with water and will not accumulate at the top of the housing when filled with water.
Do not apply phosphates or any other anti-scalents either before or after the Scale Prep System.
Scale Prep Systems are only partly filled with media; systems must have an adequate freeboard.
Scale Prep Systems must use a Spider Flexible Hub and Lateral to ensure proper fluidization. (For larger tanks, use a hub and lateral with a garnet underbed.
Scale Prep System operates in the UP-FLOW mode ONLY!!!! The tank connec-tions are normally opposite from the standard down flow configuration.
Recommended to use a flow restrictor that is sized to the proper tank and water flow.