How the WS1 Hi-Flow System Softens Water:
Hard water passes through the media tank that contains resin beads coated with sodium ions. The calcium and magnesium ions are exchanged for sodium (or potassium) ions, thus softening the water. When the beads have trapped the hardness and need to be regenerated, the Hi-Flow’s control valve charges them with the brine from the brine tank.
As regeneration occurs, calcium and magnesium (hardness) ions are freed from the beads, replaced with sodium or potassium ions; and the system is ready to soften water again.
• Up to six fully adjustable cycles
• Flow rates to 27 gpm
• Operating pressure to 125 psi
• Operating temperatures to 110°F
• Relay can signal modem or call device
• Meter (DIR) or time clock initiated regeneration
Brine tank performance insurance
All Charger water softeners may be ordered with optional salt grid which virtually prevents salt bridging.
Save water and up to 40% in salt usage by adding meter-controlled regeneration to your unit.